Logo

Quality Chemical Industries

Industrial Waxes
Send Enquiry
Home » Industrial Lubricants Oil Additives

Industrial Lubricants Oil Additives

Conning Oil Emulsifier

Conning Oil Emulsifier (Qualitex COE) : is a conning oil emulsifier used along with Spray Oil for both Polyester & Nylon texturised yarns.

Typical Specifications

PROPERTIES SPECIFICATION
  MINIMUM MAXIMUM
Physical Appearance Clear Liquid
Color Colourless to Pale Yellow
Acid Value mg of KOH/gm 5 25
5 % pH 4 7
Application :
Qualitex COE is used in Textiles as follows
parts Qualitex ] COE 90% parts Spray Oil.
The above Blend is directly used in Weaving & Conning process as per requirements.

Packing : 200 Kgs HDPE Drums


Biocide

Biocide for Metal Working fluids :
"Quali Bio BXB" is used as a good Bactericide & Fungicide for metal working Fluids.

Typical Specifications

PROPERTIES SPECIFICATION
  MINIMUM MAXIMUM
Physical Appearance Light to Pale Yellow Clear Liquid.
Chemical Nature Triazine Derivatives.
5 % pH IN D/W 10.0 11.0.
SP. GRAVITY AT 27°C 1.145 1.155
SOLUBIOLITY IN WATER Miscible With All Proportion AMINE VALUE 590 620

Application : It is a cost effective wet state Bactericide / Fungicide for metal working fluids, detergents, cooling waters & for industrial plant cleaning. Works well in neutral to alkaline medium.

Method Of Uses : 0.5 - 2 % Depends on Application.

Packing : 50 Kgs Carboys / 200 Kgs HDPE Drums


Metal Working Fluid Additive

Metal Working Fluid Additive : Qualimol18 is a high performance Emulsifier & corrosion inhibitor for Water miscible cutting fluids for metalworking. It is a combination of anionic & Nonionic Emulsifier & Corrosion inhibitor with extra performance additives.

Typical Specifications

PROPERTIES SPECIFICATION
  MINIMUM MAXIMUM
Appearance Clear Viscous Liquid
Color Brown
pH, 5% in Distilled Water 8.5 11
Acid Value, mg of KOH/gm 1 10
Amine Value, mg of KOH/gm 45 70
Specific Gravity @30°C 1.035 1.050
Heat Stability @70°C Stable
Kinematic Viscosity @ 100ºC, cSt 32 38
Cold Test (POUR POINT ), °C To be Reported
Oil Solubility 16 - 18% CLEAR
5% Emulsion Test of Above Solution in 500 ppm Hard Water STABLE FOR 24 Hours
Application : Recommended for use in Naphthenic,Paraffinic Base Oil at suggested treat level to get Best Suited results in Soluble Cutting Oil as per BIS 1115 Specs

Packing : 200 Kgs HDPE Drums


Economical & General Purpose Rust Preventive Oil Additive

Economical & General Purpose Rust Preventive Oil Additive : "Qualicoat 16 NB C" is specially designed blend of film forming material, corrosion inhabitor, specially selected synthetic waxes. Qualicoat 16 NB C is also blended with a additive which can withstand horizontal water displacement properties and seal the corners and edges of the testing specimen in salt spray & humidity cabinet. Qualicoat 16 NB C is also blended with special type of wetting agent which will adhere to the parts which it will Coat and also help in degreasing easily.

Qualicoat 16 NB C is a specially designed concentrate which can be used in solvent based product in various ratios to get required protection in salt spray, humidity cabinet and correspondingly to protect in indoor & outdoor protection

Typical Specifications

PROPERTIES SPECIFICATION
  MINIMUM MAXIMUM
Physical Appearance Soft Paste
Color Light Brown Coloured
Drop Melting Point Above 45 Deg C
Acid Value 5 mg KOH, max
SAP Value 20 Max
25% Solubility in MTO To Pass, No Separation to be Observed.
Recommended Dosage
Qualicoat 16 NB C 18 20 % w/w
MTO 82 80 % w/w
Butyl Celsolve 0.5 - 1 %
Application : Recommended for Formulating Economical & General Purpose Rust Preventive Oil to be used in Engineering, Steel Industries.

Packing : 180 Kgs MS Barrels


Synthetic & Semi Synthetic Coolant Oil

Synthetic & Semi Synthetic Coolant Oil :

Application :
Fully Synthetic Cutting Oil Fully Synthetic Cutting Oil for use in Grinding, Milling, CNC Machines, Cast Iron etc.
Semi Synthetic Cutting Oil Semi Synthetic Cutting Oil for use in Grinding, Milling, Turning Drilling etc.
Fully Synthetic Cutting Oil
Qualisynth 2000
Semi Synthetic Cutting Oil
It is a synthetic kind of coolant determined for use on ferrous metals.
Qualisynth 4000



Qualimol 18

Qualimol18 is a high performance Emulsifier & corrosion inhibitor for Water miscible cutting fluids for metalworking. It is a combination of anionic & Nonionic Emulsifier & Corrosion inhibitor with extra performance additives 

Typical Specifications

PROPERTIES SPECIFICATION
  MINIMUM MAXIMUM
Appearance Clear Viscous Liquid
Color Brown
pH, 5% in Distilled Water 8.5 11
Acid Value, mg of KOH/gm 1 10
Amine Value, mg of KOH/gm 45 70
Specific Gravity @30°C 1.035 1.050
Heat Stability @70°C Stable
Kinematic Viscosity @ 100ºC, cSt 32 38
Cold Test (POUR POINT ), °C To be Reported
Oil Solubility 16 - 18% CLEAR
5% Emulsion Test of Above Solution in 500 ppm Hard Water STABLE FOR 24 Hours
This is a Non Phenolic Product.

Application : Recommended for use in Naphthenic, Paraffinic Base Oil at suggested treat level to get Best Suited results in Soluble Cutting Oil as per BIS 1115 Specs

Packing : 200 Kgs HDPE Drums


Qualimol 81

Qualimol 81 : is a very high performance Emulsifier & corrosion inhibitor for Water miscible cutting fluids for metalworking. It is a combination of anionic & Nonionic Emulsifier & Corrosion inhibitor with extra performance additives.

Typical Specifications

PROPERTIES SPECIFICATION
  MINIMUM MAXIMUM
Appearance Clear Free Flowing Liquid
Color Reddish Brown
SPECIFIC GRAVITY @30°C 1.035 1.050
KINEMATIC VISCOSITY @100°C, cSt 32 38


pH, 5% in Distilled Water 8.5 11 ACID VALUE, mg of KOH/gm 1 15 AMINE VALUE, mg of KOH/gm 45 70 18% OIL SOLUBILITY in SN 70 & SN 150 Stable without any sedimentation/Separation 

PROPERTIES SPECIFICATION
  MINIMUM MAXIMUM
5% Emulsion Stability in
Tap Water
Stable without any Oil Separation for
5% Emulsion Stability in
100 ppm Hard Water
Stable without any Oil Separation for
Minimum 24 Hours
5% Emulsion Stability in
500 ppm Hard Water
Stable without any Oil Separation for
Minimum 24 Hours
5% Emulsion Stability in
800 ppm Hard Water
Stable without any Oil Separation for Minimum 24 Hours
CAST IRON CORROSION 0/0-0 0/1-1
CAST IRON CORROSION 0/0-0 0/1-1
COPPER CORROSION TEST - 1
Refractive Index of 5% Emulsion in Tap Water (ERMA Model) 5.5 6.2
Refractive Index of 5% Emulsion in TapWater (ATAGO Model) 5.5 6.2
Frothing Test No Froth after 15 Minutes
Thermal Stability Test Shall Pass The Test
SALIENT FEATURES OF PACKAGE
" Excellent Corrosion Protection
" Self Emulsifiable
" Good & Stable Emulsion
" Excellent Biocide Effect
" Bio-Degradable
" Excellent Hard Water Stability
" Phenol Free

Application : Recommended for use in Blending of Soluble Cutting oil, with SN 70 / 150 Base Oil Standards

Packing : 200 Kgs HDPE Drums


Qualimol 18 (II)

We are offering Qualimol 18 (II).
Chemical Name
Soluble Cutting Oil Additive

Application : Metal working fluid additive, for use to formulate soluble cutting oil in Paraffinic base oil As per BIS 1115 Standard








Qualimol 81 GP

We are offering Qualimol 81 GP.
Chemical Name
High Performance Soluble Cutting Oil Additive

Application : High-Performance Emulsifier corrosion inhibitor for water-miscible cutting fluids for Metalworking, combination of ionic non-ionic emulsifier and corrosion inhibitor with extra performance additives






Home   |    Profile   |   Products   |   Infrastructure   |     Media Gallery   |   Our Reach   |   Contact Us  
Member IndiaMART.com© Quality Chemical Industries, Navi Mumbai. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?