Qualimol81

Send Enquiry

Qualimol?]81 is a very high performance Emulsifier & corrosion inhibitor for Water miscible cutting fluids for metalworking. It is a combination of anionic & Nonionic Emulsifier & Corrosion inhibitor with extra performance additives.

Typical Specifications

Properties Specification MINIMUM MAXIMUM Apperance Clear Free Flowing Liquid Color Reddish Brown SPECIFIC GRAVITY @30°C 1.035 1.050 KINEMATIC VISCOSITY @100°C, cSt 32 38

pH, 5% in Distilled Water 8.5 11 ACID VALUE, mg of KOH/gm 1 15 AMINE VALUE, mg of KOH/gm 45 70 18% OIL SOLUBILITY in SN 70 & SN 150 Stable without any sedimentation/Separation

Properties Specification MINIMUM MAXIMUM 5% Emulsion Stability in Tap Water Stable without any Oil Separation for Minimum 24 Hours 5% Emulsion Stability in 100 ppm Hard Water Stable without any Oil Separation for Minimum 24 Hours 5% Emulsion Stability in 500 ppm Hard Water Stable without any Oil Separation for Minimum 24 Hours 5% Emulsion Stability in 800 ppm Hard Water Stable without any Oil Separation for Minimum 24 Hours CAST IRON CORROSION 0/0-0 0/1-1 CAST IRON CORROSION 0/0-0 0/1-1 COPPER CORROSION TEST 1 Refractive Index of 5% Emulsion in Tap Water (ERMA Model) 5.5 6.2 Refractive Index of 5% Emulsion in TapWater (ATAGO Model) 5.5 6.2 Frothing Test No Froth after 15 Minutes Thermal Stability Test Shall Pass The Test

SALIENT FEATURES OF PACKAGE

• Excellent Corrosion Protection
• Self Emulsifiable
• Good & Stable Emulsion
• Excellent Biocide Effect
• Bio-Degradable
• Excellent Hard Water Stability
• Phenol Free.

Application: Recommended for use in Blending of Soluble Cutting oil, with SN 70 / 150 Base Oil Standards.

Packing: 200 Kgs HDPE Drums